Test & Measurement System Solution Provider Search
 

   
 Test Systems    System Modules    System Software    Accessories  
 
   RF & Microwave   Wireless Communications   Signal Monitoring & Geo-location  More...
 Product Documents   Software Tools (Free)   System Software    
 
 Company Profile   Customers   Partners   Photos    
Quick Link
Home > System application > Wireless Terminal Pre-conformance & Design Verification Test
 
AT800 RF Pre-conformance Test System
AT800 System is ideal of RF Pre-Conformance & Design Verification test tool for Wireless Terminals (Mobile Phones, etc.) with different wireless technologies. Furthermore, AT800 is all-in-one system that supports multiple wireless standards on the same system hardware and software platform at the same time. AT800 is affordable RF Pre-conformance test system with proven high level test accuracy. AT800 System is ideal RF quality assurance solution for Wireless Terminal Manufacturers, Test Labs, as well as OEM Manufacturers.
 
AT800-TX Wireless Transmitter Pre-Conformance Test System
AT800-TX is dedicated test system for verifying the transmitter (TX) performance of wireless terminals of different wireless technologies. AT800-TX is low-cost TX design verification test system which fully utilizes the customer's Wireless Tester & Spectrum Analyzer on hand, to accelerate the time-consuming TX test cases, such as Spurious Emission.
 
AT800-RX Wireless Receiver Pre-Conformance Test System
AT800-RX is dedicated test system for verifying the receiver (RX) performance of wireless terminals of different wireless technologies. AT800-RX is low-cost RX design verification test system which fully utilizes the customer's Wireless Tester & Signal Generators on hand, to accelerate the time-consuming RX test cases, such as Blocking Performance.
 
AT600 CTIA OTA Test System Software
AT600 OTA (Over The Air) Test System Software is ideal tool for verifying Antenna performance of wireless terminals, according to the following standards issued by CTIA (Cellular Telecommunication and Internet Association). AT600 is affordable OTA Test System Software for CTIA Conformance & Pre-Conformance Testing, for Wireless Terminal Manufacturers as well as Test Labs.
 
AT600-OATS Open Area OTA Test System
The ultra expensive big size RF Anechoic Room is required for far-field OTA (Over The Air) testing on DUTs with lower frequency (longer wavelength) and larger size, such as HF/VHF Radio Antennas and Base Station Smart Antennas. OATS (Open Area Test Site) is a reasonable alternative in the industry. AT600-OATS system software is affordable open area far-field OTA test system software for Smart Antenna and other large DUTs. AT600-OATS is a versatile test system software platform not only for Passive Antenna Patttern Test, but also for Active TRP / TIS Test, as well as OSE and EMI Radio Spurious Test.
 
AT600-FR Full Ring MIMO OTA Test System Software
AT600-FR System Software implements the Full Ring MIMO OTA test method, based on the Multi-Channel Emulator EB (Elektrobit) PropSim F8. Although the official MIMO OTA standard has not been finalized yet, the Full Ring test method is the most widely accepted methodology by the industry and the customers, such as Nokia, LG, Vodafone, NTT Docomo, etc. AT600-FR software supports all the existing MIMO technologies, for all the MIMO Channel Models. AT600-FR is affordable MIMO OTA test system softare for Wireless Terminal Manufacturers and Test Labs.
 
AT600-SC Single Cluster MIMO OTA Test System Software
AT600-SC System Software implements the Single Cluster MIMO OTA test method, based on the Multi-Channel Emulator EB (Elektrobit) PropSim F8. Comparing with Full Ring test method, Single Cluster is suitable for implementation in customer’s existing small Anechoic Chambers, which is much more cost-effective. Therefore, AT600-SC is the ideal entry level MIMO OTA Test System with the best price/performance ratio for Wireless Terminal Manufacturers. And the system is upgradable from AT600-SC to AT600-FR Full Ring MIMO OTA Test System.
 
MPS-MUE Wireless RF & DC Power Switch Control Box
MPS-MUE consists of a SP6T RF Switch and a Relay Matrix, to simultaneously switch wireless RF signal and DC Power Supply. The test system based on MPS-MUE can be used for Design Verification or NPI testing for Multiple (6 or more) UEs continuously without operation interruption.
 
ACTP Test System Software Platform
ACTP (Ascentest Test System Software Platform) is software platform for automatic test system development & management, test sequence execution, data collection and analysis. ACTP is ideal software platform for developing small and middle scale systems of test automation, which provides numerous practical functions and application interfaces for convenient secondary development and easier system operation, by implementing modular & object oriented programing techniques. ACTP is now mature, stable and code-efficient System Software Platform after continuous improvement and successful implementation in different test system applications for different customers.
Page 1 of 9