 |
|
|
 |
|
|
|
|
|
 |
| Related products |
 AT600 CTIA OTA Test System Software
AT600 OTA (Over The Air) Test System Software is ideal tool for verifying Antenna performance of wireless terminals, according to the following standards issued by CTIA (Cellular Telecommunication and Internet Association).
AT600 is affordable OTA Test System Software for CTIA Conformance & Pre-Conformance Testing, for Wireless Terminal Manufacturers as well as Test Labs. AT600-OATS Open Area OTA Test System
The ultra expensive big size RF Anechoic Room is required for far-field OTA (Over The Air) testing on DUTs with lower frequency (longer wavelength) and larger size, such as HF/VHF Radio Antennas and Base Station Smart Antennas. OATS (Open Area Test Site) is a reasonable alternative in the industry. AT600-OATS system software is affordable open area far-field OTA test system software for Smart Antenna and other large DUTs.
AT600-OATS is a versatile test system software platform not only for Passive Antenna Patttern Test, but also for Active TRP / TIS Test, as well as OSE and EMI Radio Spurious Test. AT600-FR Full Ring MIMO OTA Test System Software
AT600-FR System Software implements the Full Ring MIMO OTA test method, based on the Multi-Channel Emulator EB (Elektrobit) PropSim F8.
Although the official MIMO OTA standard has not been finalized yet, the Full Ring test method is the most widely accepted methodology by the industry and the customers, such as Nokia, LG, Vodafone, NTT Docomo, etc.
AT600-FR software supports all the existing MIMO technologies, for all the MIMO Channel Models.
AT600-FR is affordable MIMO OTA test system softare for Wireless Terminal Manufacturers and Test Labs. AT600-SC Single Cluster MIMO OTA Test System Software
AT600-SC System Software implements the Single Cluster MIMO OTA test method, based on the Multi-Channel Emulator EB (Elektrobit) PropSim F8.
Comparing with Full Ring test method, Single Cluster is suitable for implementation in customer’s existing small Anechoic Chambers, which is much more cost-effective.
Therefore, AT600-SC is the ideal entry level MIMO OTA Test System with the best price/performance ratio for Wireless Terminal Manufacturers. And the system is upgradable from AT600-SC to AT600-FR Full Ring MIMO OTA Test System. ACTP Test System Software Platform
ACTP (Ascentest Test System Software Platform) is software platform for automatic test system development & management, test sequence execution, data collection and analysis.
ACTP is ideal software platform for developing small and middle scale systems of test automation, which provides numerous practical functions and application interfaces for convenient secondary development and easier system operation, by implementing modular & object oriented programing techniques.
ACTP is now mature, stable and code-efficient System Software Platform after continuous improvement and successful implementation in different test system applications for different customers. PIMS Production Information Management System
PIMS (Production Information Management System) is also called "Shop Floor System" or "Factory Information System", which is versatile software tool for electronics production control and management.
PIMS collects the data from the key work stations, and then stores, sorts, analyzes all the collected data and generates results and reports to help manage production procedures, improve production efficiency, reduce production cost and avoid mistakes. MPS-Tester-SW Multi-port Vector Network Analysis System Software
MPS-Tester-SW System Software controls Ascentest MPS Multi-Port RF/Microwave Switch Matrix and Vector Network Analyzer, to make accurate and fast S-Parameter measurement on multi-port components, such as 4-port Directional Couplers and 9-port Smart Antennas, as well Smart Phone Multi-band Antennas.
The software can also be used to control Vector Network Analyzer to measure S-Parameter directly and automatically. |
| |
| Product features and technical data: |
| System overview |
The ultra expensive big size RF Anechoic Room is required for far-field OTA (Over The Air) testing on DUTs with lower frequency (longer wavelength) and larger size, such as HF/VHF Radio Antennas and Base Station Smart Antennas. OATS (Open Area Test Site) is a reasonable alternative in the industry. AT600-OATS system software is affordable open area far-field OTA test system software for Smart Antenna and other large DUTs.
AT600-OATS is a versatile test system software platform not only for Passive Antenna Patttern Test, but also for Active TRP / TIS Test, as well as OSE and EMI Radio Spurious Test.
OATS system is normally built on the top of buildings with at least 4 or 5 floors.
The requirements on the test environment include enough distance between DUT & Reference Antenna, no big obstacles and base station transmitters around the test site.
Other environmental considerations include: water-proof, wind-proof, lightning-proof, etc.
The system consists of Vector Network Analyzer (or SG+SA)，RF Amplifier Unit, Antenna Polarity Switch Unit, RF Switch Unit (for 9-port Smart Antenna), Reference Test Antenna, DUT Antenna, Outdoor Antenna Turn Table and Controller, RF Cables and other system accessories.
|
| Function characteristics |
System Test Capabilities:
1. Passive Antenna Pattern Test, including Smart Antenna for TD-SCDMA & TD-LTE (LTE-FDD) Base Stations.
2. Active TRP (Total Radiated Power) Test.
3. Active TIS (Total Isotropic Sensitivity) Test.
4. OSE (Openn Sky Efficiency) Test, such as GPS OSE.
5. EMI Radiated Spurious Test.
6. Standard test report with 2D & 3D graphs and data forms.
7. Hardware and software customization service is avaible for customer's different test requirements.
System Features:
1. Delivered System Software, built on Mature, Flexible and Modular software platform.
2. AT600-OATS System Software has been successfully delivered for the most famous base station antenna manufacturer in China, for testing 9-port Smart Antennas.
3. Ascentest provides on-site investigation service for selecting the best Open Area Test Site within the customer's designated site area, and for proposing the most practical system solution and engineering planning.
4. Very high performance / cost ratio.
5. Hardware and software customization service is avaible for customer's different test requirements. |
| |
|
| |
| Software structure |
.png)
|
| More |
Delivered system:
MPS RF Switch Unit:
|
| Order information（ Contact us） |
| AT600-OATS Open Area OTA Test System |
| |
|
|
|
AT900 Instrument Calibration Test System
