 |
|
|
 |
|
 |
Home > System application > Wireless Terminal Pre-conformance & Design Verification Test > RF Pre-conformance Test |
|
 |
|
|
| AT800 RF Pre-conformance Test System |
| AT800 System is ideal of RF Pre-Conformance & Design Verification test tool for Wireless Terminals (Mobile Phones, etc.) with different wireless technologies.
Furthermore, AT800 is all-in-one system that supports multiple wireless standards on the same system hardware and software platform at the same time.
AT800 is affordable RF Pre-conformance test system with proven high level test accuracy.
AT800 System is ideal RF quality assurance solution for Wireless Terminal Manufacturers, Test Labs, as well as OEM Manufacturers. |
|
|
 |
|
|
|
| AT800-TX Wireless Transmitter Pre-Conformance Test System |
| AT800-TX is dedicated test system for verifying the transmitter (TX) performance of wireless terminals of different wireless technologies.
AT800-TX is low-cost TX design verification test system which fully utilizes the customer's Wireless Tester & Spectrum Analyzer on hand, to accelerate the time-consuming TX test cases, such as Spurious Emission. |
|
|
|
|
|
|
| AT800-RX Wireless Receiver Pre-Conformance Test System |
| AT800-RX is dedicated test system for verifying the receiver (RX) performance of wireless terminals of different wireless technologies.
AT800-RX is low-cost RX design verification test system which fully utilizes the customer's Wireless Tester & Signal Generators on hand, to accelerate the time-consuming RX test cases, such as Blocking Performance. |
|
|
|
|
|
|
| AT500 Wireless Terminal Production Test Systems |
| Wireless Terminals, such as mobile phones, smart phones and PADs, are integrating more and more functions including Wireless Technologies such as 2G/3G/WiFi/Bluetooth/A-GPS/FM, etc.
However, the product's life cycle is becoming shorter and shorter, with much more competition and less profit margin, while the labor cost of production operators is rising sharply.
Therefore, the wireless terminal manufacturers are pushing to reduce production cost even more imperatively.
Ascentest AT500 Series Production Systems are the right solutions to those needs for production cost reduction without compromising product quality, by implementing production automation and informatization, making full use of expensive instruments and optimizing production procedures. |
|
|
|
|
|
|
| AT510 RF Test System |
| AT510 is RF Calibration / Final Test System for Production of Wireless Terminals, such as mobile phones, smart phones and PADs, etc.
The system implements Non-Signaling test method to improve production efficient for Bard Test of 2G/3G/WiFi/Bluetooth/A-GPS/FM, etc.
AT510 system supports both old and new models of instruments, to increase the utilization of the expensive test equipment, and improve the flexibility for customer’s production investment plan, such as instruments rental.
AT510 system reduces the cost of production not only by improving efficiency, but also by optimizing test procedures, stabilizing the product quality, and reducing the need for operators in production lines.
AT510 system can be controlled by Ascentest PIMS (Production Information Management System) for data collection and production / factory management (Shop Floor Management), to upgrade the production management level. |
|
|
|
|
|
|
| AT550 Machine Vision Test System |
| AT550 is automatic vision inspection test system, which is ideal tool for checking appearance of different products, including consumer electronics and other general products, such as components, connectors, labels, bottles, tubes, medicine capsules, mechanical parts, gear wheels, etc.
Typical Applications for vision inspection of mobile phones and other Wireless Terminals are MMI (Man Machine Interface) Testing.
AT550 system greatly improves the efficiency and accuracy for appearance inspection. It also reduces production cost by requiring lesser operators and avoiding the eye weariness of operators.
AT550 system can be controlled by Ascentest PIMS (Production Information Management System) for data collection and production / factory management (Shop Floor Management), to upgrade the production management level. |
|
|
|
|
|
|
| AT101 Distributed Signal Monitoring System |
| AT101 is distributed Spectrum & Signal Monitoring network solution for Spectrum Regulation & Signal Monitoring, with TDOA Geo-Location capabilities.
The system is based on Agilent N6841A RF Sensor as well as the famous N6820E “Black Bird” software (E3238S) for ultra fast frequency sweeping & signal processing.
And dedicated Analog Demodulation Monitoring Receiver can be integrated in AT101 system for FM / AM signal monitoring & recording.
AT101 system is fully expandable, from single unit covering several kilometers, to a fully distributed network covering a specific big area or even a whole city.
AT101 system is ideal tool for spectrum regulation & wireless signal monitoring. |
|
|
|
|
|
|
| AT102 Turbine Speedometer Monitoring System |
| The Water Turbine's Speedometer (Electro Hydraulic Speed Regulator) consists of Electric Control, Hydraulic Transmission and accessories. And the core of Electric Control is PLC controller.
In order to monitor the status of the Speed Regulator, AT102 system continuously measuring all the key parameters, including Turbine Set Frequency, Power Grid Frequency, Guide Vane Opening, Adjustment Variables, Active Power, etc.
The parameters are either frequency or voltage and current signals, which can be measured by the multi channel measuring equipment of AT102.
In AT102 system, 8 Agilent M9183A PXI modules, together with the system software, work as an 8-Channel Automatic Monitoring System for Frequency, Voltage and Current. |
|
|
|
|
|
|
| MPS Multi-Port RF / Microwave Switch Matrix |
| MPS (Multi Port Switch) Series Multi-Port RF / Microwave Switch Matrix routes 2 or 4 RF Signals to 6 / 8 / 12 / 24 or more ports.
The typical MPS applications are Vector Network Analyzer port expansion for multi-port RF / Microvave component testing, and multi-DUT testing for basestation, wireless terminals or mobile phones, as well as high-speed data cable testing. |
|
|
|
|
|
|
| MPS-MUE Wireless RF & DC Power Switch Control Box |
| MPS-MUE consists of a SP6T RF Switch and a Relay Matrix, to simultaneously switch wireless RF signal and DC Power Supply.
The test system based on MPS-MUE can be used for Design Verification or NPI testing for Multiple (6 or more) UEs continuously without operation interruption. |
|
|
|
|
|
