 |
|
|
 |
|
|
|
|
|
 |
| Related products |
 MPS-Tester Multi-port Vector Network Analysis System
MPS-Tester system expands 2-port Vector Network Analyzer to 4 / 8 / 12 /24 or more ports for accurate vector network analysis on multi-port RF / Microwave components, up to 40GHz.
MPS-Tester system consists of MPS (Multi-Port Switch Matrix), 2-port VNA, and system software.
Our proprietary Multi-port Calibration Algorithm significantly improves the system's accuracy for testing multi-port components up to 40GHz.
The system, as an ideal substitute for expensive 4-port and 8-port VNA, is a cost-effective test tool for testing multi-port DUT, such as Smart Antennas, Base Station Diplexers, Directional Couplers, Hybrid Couplers, Power Combiners / Splitters, Circulators, and other multi-port RF / Mirowave components and modules. HSCT-C USB3.1 Type-C Cable Test System
HSCT-C is dedicated fully automatic test system for USB3.1 Type-C cables. HSCT system is built upon the platform of Ascentest HSCT High-Speed Cable Test System. The system is based on the functions of Keysight E5071C (Opt. 4K5, TDR) and Ascentest MPS-HSCT Multi-Port Switch Matrix. The system automatically and accurately tests the Frequency & Time Domain parameters for USB3.1 Type-C cable assemblies, which greatly speeds up the tests and lowers the test cost. OMTS Optical Transceiver Module Test System
OMTS (Optical transceiver Module Test System) is based upon Ascentest MPS 4x16 Multi-Port RF/uWave Switch Matrix and Ascentest’s proven automatic test platform, implementing the measuring power of Optical Power Meter, Optical Attenuator, Wide-band Oscilloscope, BERT and DC Power Supply, to automatically perform the full 4-channel test for the 40Gbps QSFP+ Optical Transceiver Modules, up to 40GHz. HSCT High-Speed Cable Test System
HSCT system is based on the functions of Agilent E5071C (Opt. TDR) and Ascentest MPS-HSCT Multi-Port Switch Matrix. The system automatically and accurately tests the Frequency & Time Domain parameters as well as Eye Diagram for high speed cables up to 100Gbps, such as QSFP28/QSFP+/SFP+/MiniSAS/HDMI, etc. AT890 Compliance Test System for 2.4GHz & 5GHz Wireless Devices
Ascentest Releases AT890 Test System for EN 300 328 V1.8.1 & EN 301 893 V1.7.1 on Sep. 1st, 2014.
AT890 systetm is accurate, convenient, flexible, and cost-effective test tool for Test Labs and Wireless Manufacturers to validate 2.4GHz & 5GHz devices according to the new standards. VMNA (Virtual Multi-port Network Analyzer) Test System
VMNA system is built upon Ascentest high-speed solid-state RF Switch Matrix (100MHz ~ 8GHz), which expands a 2-port Vector Network Analyzer to 8-port or 16-port Vector Network Analysis System.
Due to the system’s ultra high-speed switching and sweeping measurement, all the operators at the 16 ports virtually feel like they are using that single 2-port Vector Network Analyzer exclusively!
This is why this system is named as “Virtual Multi-port Network Analyzer”, or VMNA as abbreviation. AT891 Compliance Test System for 4G LTE Wireless Devices
AT891 system accurately performs compliance test for 4G LTE wireless terminals, according to ETSI EN 301 908-13, and FCC e-CFR Title 47, Part 2 & Part 27.The cost effective AT891 system adopts semi-auto test method to increase the test efficiency dramatically at a lower cost. AT891 system is the best 4G LTE test tool for Test Labs and wireless manufacturers. AT105 EM Shileding/Absorbing Material Test System
AT105 Electroagnetic Wave Shileding/Absorbing Material Test System consists of Agilent ENA/PAN/PNA-L Network Analyzer and Ascentest customized accessories and software.
The system automatically tests the following key parameters of the MUT(Material Under Test): Shielding Effect, Permeability/Permittivity, Reflection Loss/Attenuation, Power Loss. AT900 Instrument Calibration System
AT900 is a metrology level performance verification test system for instrument calibration.
By implementing advanced test methodology and calibration techniques, the delivered system makes the calibration and performance verification test with extremely high accuracy for Wireless & RF Instruments such as Wireless Testers, Vector Network Analyzers, Signal Generators, Spectrum Analyzers.
AT900 system is ideal instrument calibration tool for big wireless & OEM manufacturers and test labs. |
| |
| Product features and technical data: |
| System overview |
AT800 System is ideal RF Pre-Conformance & Design Verification test tool for Wireless Terminals (Mobile Phones, etc.) with different wireless technologies.
Furthermore, AT800 is all-in-one test system that supports multiple wireless standards on the same system hardware and software platform at the same time.
AT800 is affordable RF Pre-conformance test system, as customer's in-stock equipment, which meets the system requirements, can be integrated in the AT800 system, which greatly reduces the system overall cost for customers with some instruments on hand.
The system's advanced hardware and software designs ensure the proven high level test accuracy.
AT800 System is ideal RF quality assurance solution for Wireless Terminal Manufacturers, Test Labs, as well as OEM Manufacturers.
AT800 System covers the following standards (Test Specifications):
1. WiFi (IEEE 802.11a/b/g/n): IEEE 802.11-2007, IEEE 802.11n
2. Bluetooth 1.2/2.0/EDR/2.1: Bluetooth RF.TS/2.0.E.3
3. GSM / GSM-R / GPRS / EGPRS: 3GPP TS51.010-1
4. WCDMA / HSDPA / HSUPA / HSPA: 3GPP TS34.121-1
5. TD-SCDMA / HSDPA / HSUPA / HSPA: 3GPP TS34.122
6. LTE FDD & LTE TDD (so called TD-LTE): 3GPP TS 36.521-1
7. Related Regulations by FCC, ETSI, R&TTE. |
| Function characteristics |
1. Delivered System, built on Mature, Flexible and Modular hardware and software platform.
2. AT800 Systems have been successfully adopted by the most famous mobile phone manufacturer, serving as RF Pre-Conformance and Design Verification test tool.
3. All Test Cases are strictly designed according to wireless standards (Test Specifications).
4. Accurate, Automatic & Efficient.
5. Very high performance / cost ratio.
6. Expandable, Upgradeable and Customizable, to support customer's specific test requirements and more wireless standards. |
| |
|
| |
| System structure |
SA: Spectrum Analyzer
MSG: Microwave Signal Generator
VSG: Vector Signal Generator
Test Set: Wireless Test Set / One Box Tester / OBT
BB Fader: Baseband Fading Simulator (Channel Emulator)
RF Fader: RF Fading Simulator (Channel Emulator)
DC PS: DC Power Supply
PM: Power Meter
Power Sensor: Connected to Power Meter for Path Loss Calibration
AT800-SIB：Standard Interface Box
AT800-FLB：Filter Box
AT800-SSW：System Software |
| Software structure |
|
| More |
Photos of delivered systems:
AT800 GSM-R / WiFi RF Pre-conformance Test System
AT800 WiFi / Bluetooth RF Pre-conformance Test System
|
| Order information（ Contact us） |
| AT800 RF Pre-conformance Test System |
| |
|
|
|
AT900 Instrument Calibration Test System
